|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
 ;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
 ;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
 ;
Excelent service, the manual is complete, very cheap and fast
Alberto
 ;
The item received was as described, as expected. I was pleased with the order. Thank you.
O
Sub-Bright Adjustment(Option)
1) Tune the TV set to receive a EU 05 CH. 2) Enter WB mode by pressing the IN_START & �4� button. Adjust S-BRI data until 100% and 80% GRAY PATTERN is classified. (Use F , G , D ,E, OK buttons)
Fifth Vertical Line 100% and 80% GRAY PATTERN
SUB BRIGHT Adjustment Signal
O
Auto-Convergence Check (option)
1) Check the Auto-Convergence in PAL/NTSC mode separating. 2) Press the IN_START key on R/C for adjustment and press the Time key to check whether Auto-Convergence works normally in each mode. 3) If not,check the Convergence condition or Measuring condition and SENSOR condition. 4)The shipment must be done after restoring the final auto convergence data value. (Restore a Convergence data : IN_START -> �3� -> TEXT)
O
Check the Option Adjustment
1) Check the OPTION1~5 data of attach 6 is well recorded. 2) The option value of each suffix is started on JOB EXP of 3141VMN chassis Assy.
- 17 -
|
|
 |
> |
|